top of page
unnamed (1).jpg

MPL AG Newsletter January 2024

FLEXIO Flexible IO Solutions for PIP40 System

Valued reader,

The FLEXIO product is a powerful FPGA module, enabling an easy and flexible integration of peripherals. The aim of the FLEXIO module is to connect simple interfaces such as analog / digital IO, PWM, SPI, I2C, etc without any special speed requirements.
Up to 4 front-end modules can be connected to the FLEXIO I/O-controller. The front-end modules enable the installation of specific connectors in the front of the device and the fulfillment of ESD/EMC device requirements, etc. The connection between the FLEXIO and the frontend modules will take place via a standardized, identical interface.

  FPGA based I/O-controller
    •  Full PCIe mini card formfactor
    •  Lockable headers
    •  Standardized pin assignment
    •  Serves up to 4 front-end modules
    •  Automatic front-end module detection
    •  Content can be updated in the field

Front-end Module
ISIO8DB9
• 8 digital I/Os
• Adjustable threshold level
• Galvanic isolated
• Up to 36V

Front-end Module
ISIO-Avionics 16DB25
• 16 I/O channels
• 28V input/output voltage
• Output protection (temperature, over-current...)
• adjustable input thresholds
• Opto - isolated

Front-end Module
ISO8DB25
• 8 Relays Outputs
• Galvanic isolated
• One FlexIO port required

Front-end Module
ISIO16Mil17-35
• Same functionality as 2x ISIO8DB9
• Two FLEXIO ports required
• MIL17-35 connector
• Galvanic isolation

Front-end Module
Custom Front-ends
• Encoder implementation in hardware
• FPGA encoder drives DAC on front-end
• Encoder generates coded AM sine wave
• Software supplies modulation data to the encoder

Weblink for the FLEXIO: www.mpl.ch/t2880.html

Kind regards,
Your MPL team


 

flexio1.jpg

Contact information:

 MPL AG
Täfernstrasse 20
CH-5405 Dättwil
Switzerland

phone: +41 (0)56 / 483 34 34
email: info@mpl.ch
email: sales@mpl.ch
internet: www.mpl.ch

flexio6.jpg
flexio2.jpg
flexio4.jpg
flexio3.jpg
flexio5.jpg
bottom of page